Introduction and Replacement Suggestions for BYD P20PS VII Consumables

In the daily operation of electric forklifts, the loss of wearing parts is a normal phenomenon. Timely identification and replacement of wearing parts can effectively ensure the operation stability and service life of the forklift. The following is a detailed description of the common wearing parts and replacement suggestions for BYD P20PSVII electric forklifts.

Introduction of common wearing parts

tire

As a part of the forklift that directly contacts the ground, the tire bears the weight of the equipment and the weight of the goods. It is prone to wear and tear and cracking when operating under heavy loads and complex road conditions for a long time. During daily inspections, if the tire pattern depth is found to be less than 1 mm, or if the tread has large cracks or bulges, it needs to be replaced.

Brake Pad

Brake pads are the core components to ensure the braking performance of forklifts. Frequent braking will lead to gradual loss of friction materials. When the thickness of the brake pads is less than one-third of the original thickness, or when there is obvious abnormal sound during braking and the braking distance becomes longer, it should be replaced in time to avoid affecting driving safety.

All kinds of filter elements

The hydraulic oil filter element and air filter element of the forklift are responsible for filtering impurities in the system. After long-term use, the filter element will be blocked, which will affect the power output of the hydraulic system and the intake efficiency of the motor. During daily maintenance, if a large amount of dirt is found on the surface of the filter element, or the operating power of the equipment is significantly reduced, it is necessary to replace the suitable filter element in time.

Battery electrode

After the battery is used for a long time, the electrode part is prone to oxidative corrosion, resulting in unstable power supply. If white or green corrosion is found on the electrode surface, or the forklift is difficult to start, check the electrode status, replace the electrode if necessary, and take protective treatment.

Replacement operation suggestion

Safety preparation

Before replacing the wearing parts, be sure to power off the forklift and stop the machine, and pull up the handbrake to ensure that the equipment is in a stable state. If the operation of lifting parts is involved, support protection is required to avoid accidental falls.

part adaptation

When replacing tires, filter elements, brake pads, and other components, it is necessary to choose products that meet the equipment specifications to avoid installation failures or performance degradation due to model discrepancies.

operating specifications

When replacing the brake pads, it is necessary to synchronously check the working status of the brake pump to ensure that the braking system is free of oil leakage or stagnation. After replacing the filter element, the system should be vented or debugged as required to ensure the smooth operation of the equipment. After replacing the battery electrodes, the contact surface should be cleaned and coated with protective grease to reduce the probability of subsequent corrosion.

Daily maintenance advice

In addition to timely replacement of damaged parts, it is recommended to regularly inspect forklift parts, establish a reasonable maintenance cycle, adjust the inspection frequency according to the work intensity, and check hidden dangers in advance to reduce the failure rate.