BYD ECB20 lithium battery forklift popular science, daily operation FAQ

Frequently Asked Questions about Daily Operation Battery Life

The battery life shows how long it can work when there is 20% left.

The ECB20 lithium-ion forklift is fully charged to meet the needs of conventional warehousing, loading and unloading operations. When the remaining power is 20%, it can usually maintain regular operations for 1 to 2 hours under rated load and smooth road conditions. If the operation scene is in a heavy-duty climbing state for a long time, it is recommended to stop and charge in time to avoid triggering the low-power mandatory protection mechanism and disrupting the overall operation arrangement rhythm.

What is the reason for the sudden power failure in the middle of the homework?

In such cases, do not forcibly restart the device. First, check whether the charging interface is loose and virtual, and then check whether the current load exceeds the rated load limit of the device. After excluding the above two factors, you can check the status of the vehicle power system prompt light. If the prompt light continues to be on, you can contact professional after-sales personnel for door-to-door investigation. Do not disassemble the internal components of the power cabin by yourself.

Frequently asked questions about operation and use

How to deal with the heavy steering feel?

First of all, suspend the loading and unloading operation on the hand, park the vehicle in a flat open area, check whether the steering hydraulic oil level is in the normal range, and then check whether the steering shaft position has hard debris stuck, after cleaning up the debris, you can practice running at a low speed to confirm the state, if the feel has not recovered, do not force the operation, to avoid burying the safety hazard of rollover.

What is the reason for the slow lifting speed of the fork?

In such cases, first confirm whether the current load exceeds the rated load, and then check whether the hydraulic filter is blocked. After completing the basic cleaning according to the official operation manual, the normal lifting speed can be restored. Non-professionals should not adjust the hydraulic pipeline parameters at will to avoid affecting the original performance of the equipment.

Frequently Asked Questions about Daily Maintenance

What checks should be done after the daily homework is completed?

First, turn off the power supply of the vehicle, clean up the dust and debris remaining in the cracks of the body, wipe the oil stains attached to the fork position, synchronously check the tire wear, confirm that there is no water accumulation in the charging interface, and connect to the supporting power supply to complete the finishing work of the day. The whole process usually takes no more than 10 minutes, which can effectively reduce the probability of subsequent failures.

How to maintain it when it is idle for a long time?

Before the vehicle is out of service for a long time, maintain the power level at 50% to 70%, park in a dry and ventilated shaded area, and operate for about 10 minutes every 15 days to avoid power loss damage to the power battery. Before restarting use, complete the basic vehicle inspection to confirm that all functions are normal before putting it into formal operation.