BYD CPD18S common accessories replacement and maintenance cost description

Common wearing parts replacement specifications

Walking system accessories replacement

The tires of this model's walking system are high-frequency wearing parts. They can be used for 3 to 5 years under normal working conditions. When the tread wear reaches the threshold, they need to be replaced in time. When replacing accessories, match the original rated load parameters, and do dynamic balance calibration after assembly to avoid jitter, deviation and other problems during subsequent driving, and prolong the service life of related supporting parts.

Hydraulic system parts replacement

The oil filter elements and seals of the hydraulic system belong to the category of regular replacement accessories. When the cumulative working time reaches 2000 hours, a new hydraulic oil filter element needs to be replaced. If the seals have slight oil leakage marks, they should be checked and replaced as soon as possible to avoid long-term oil shortage and wear of the hydraulic rod, causing greater component failure and unnecessary additional expenses.

Maintenance cost description for each scenario

Conventional basic maintenance cost

The routine basic maintenance is carried out once every 500 hours of work, covering basic operations such as power system line tightening, battery status detection, and oil replenishment at various lubrication points. The single maintenance cost is in a low range, which belongs to the routine fixed expenses of the daily operation of forklifts. It is recommended that users do not omit this link.

Medium and overhaul related cost reference

In addition to the replacement of conventional wearing parts, the cost of non-human failure repair and replacement of core electronic control components is relatively high. Most of these faults can be avoided in advance by daily dustproof, waterproof and overload prevention operations of the equipment. Daily state inspection of the whole equipment and early treatment of small hidden dangers can greatly reduce the long-term average maintenance cost and improve the cost performance of the whole life cycle of the equipment.