Selection of high-lift forklifts above 5 meters, configuration instructions for BYD's corresponding models

5 meters or more high lift electric forklifts are mainly used in high-rise shelf storage, high cargo loading and unloading, etc. The requirements for operational stability and safety protection are much higher than those of ordinary medium and low lift forklifts. When selecting models, it is necessary to consider the actual needs in multiple dimensions in order to choose a more suitable product.

Core points of forklift truck selection above 5 meters

Job Scenario Adaptation Verification

Before selecting the model, it is necessary to clarify the maximum load-bearing weight of the daily operation, the maximum storage height of the shelf, and reserve a safety height margin of 10 to 20 cm. It is also necessary to measure the width of the operation channel, the ground load-bearing capacity, and whether there is an operation ramp to avoid the problem that the model cannot pass normally after entering the field. If there are special environments such as low temperature and dust in the operation scene, it is also necessary to confirm the environmental adaptation capacity of the model in advance.

Core performance and security configuration review

The core requirement of high-lift operation is stability. It is necessary to focus on the anti-shake design of the gantry and the speed control logic of the lifting process. Priority is given to models that will automatically limit the driving speed during high-lift operation. In terms of safety configuration, it is necessary to confirm whether the basic functions such as lifting height limit, overload alarm, emergency power failure, and ramp parking are standard. If conditions permit, line of sight optimization design can also be selected to reduce visual blind spots for high-lift operation.

Model configuration instructions for high lift requirements

The compliance model corresponding to the high lift operation requirements of more than 5 meters currently covers the bearing range of 1 ton to 3 tons, and the maximum lifting height can be adapted to different operation scenarios from 7 meters to 12 meters, which can meet the needs of the vast majority of high-rise warehousing.

The power part uses lithium iron phosphate battery as the power source, which has a longer cycle life and fast charging speed. It can also maintain stable power output in low temperature environment, and there will be no problem of insufficient power for high-level operation. The door frame adopts high-strength wide-field design and adopts channel steel integrated rolling process. The shaking amplitude during the lifting process is small, and the operator's front line of sight is unobstructed, which can greatly improve the safety of high-level operation.

In terms of operation configuration, it is equipped with adjustable seats and lightweight operating handles, which are not prone to fatigue after long-term operation. At the same time, it is equipped with an intelligent monitoring system as standard, which can check the remaining battery power, lifting height and other core parameters in real time, making it convenient for operators to keep track of the status of the vehicle at any time.

It should be noted that there are differences in the operation scenarios of different users. When selecting a model, you can first list the priority of core requirements, and then consider the subsequent use and maintenance costs comprehensively to select a cost-effective product.