Suggestions for the use and maintenance of lithium battery forklifts in low temperature environments

In winter outdoor, cold storage and other low-temperature operating scenarios, the performance of lithium battery forklifts will be affected by the ambient temperature, causing problems such as battery life and poor start-up. By following scientific usage and maintenance methods, such problems can be effectively avoided and the operation can be carried out smoothly.

Precautions for the use of lithium battery forklifts in low temperature environments

Warm-up preparation before work

Do not operate at full capacity immediately after starting the equipment each time. Keep running at no load for 3 to 5 minutes. Wait for the temperature of the battery and transmission parts to gradually rise before normal operation. Vehicles that operate in an environment below minus 10 degrees Celsius for a long time can preheat the battery pack in advance to avoid insufficient battery activity in extremely cold environments.

Operation process operation specification

Minimize the operation of sudden acceleration and sudden braking during operation to reduce the loss of high current discharge to the battery. If it is found that the battery life of the vehicle has dropped by more than 30% compared with the normal temperature state, return to the charging area in time and do not force power loss. When the vehicle is idle, try to park it in an indoor area with a temperature of not less than 0 degrees Celsius, and do not leave it in the open for a long time.

Maintenance Suggestions for Lithium Battery Forklift in Low Temperature Environment

Lithium battery special project maintenance

Do not charge the vehicle immediately after each operation. First, place the vehicle in an environment with a temperature of 10 to 25 degrees Celsius and let it stand for 1 to 2 hours. After the battery core temperature rises, the charging operation will be carried out. The charging environment temperature should be kept above 5 degrees Celsius as much as possible. Regularly check the battery wiring port, clean the attached frost and water stains in time, and check the problem of loose wiring to avoid the risk of short circuit.

Daily maintenance of the whole vehicle

Replace the hydraulic oil and grease suitable for low temperature working conditions in a low temperature environment to avoid oil solidification affecting the operation of the equipment. Increase the frequency of tire inspections, the rubber material is easy to harden and crack at low temperature, and replace it in time if abnormal wear is found.