BYD CPD30 lithium battery forklift technical parameters, detailed description of operating performance

Description of core technical parameters

Body basic parameters

The rated load-bearing weight of this forklift meets the industry's conventional 3-ton load standard, and the width of the body is suitable for the passage needs of most ordinary storage channels. The lifting height supports multi-gear adjustment, and can be adapted to storage shelves of different heights. The weight control of the whole vehicle is reasonable, and the steering flexibility is strong under no-load conditions. It can also maintain smooth operation in narrow passages.

Power system parameters

This forklift is equipped with a large-capacity lithium battery power pack, and the charging interface supports both conventional fast charging and daily slow charging modes. The motor output power is stable and adjustable, and the braking system adopts an electro-hydraulic coordinated control scheme. The response delay is short, and the threshold for daily operation is low. Personnel with basic forklift operation experience can quickly adapt to operating habits.

security configuration parameters

The vehicle is equipped with a vehicle real-time condition monitoring module, which can view the remaining power and fault warning information at any time. There are multiple induction prompting devices around the body. When encountering obstacles at low speed, a prompt tone can be issued in time to assist the operator in avoiding latent risks during the operation.

Job performance details

Flat road transfer operation performance

When driving on the hardened road surface in a flat factory area and on the ground in a storage room, the vehicle steering accuracy is high, the fork lifting process is smooth, and there will be no goods shaking and deviation. The fluency of daily material transfer operations is good, which can adapt to most fast-paced warehousing and outbound storage needs. It can also be used to complete the stacking of goods at ordinary small loading and unloading points.

Adaptability to ramp operation

When driving on a gentle slope section in a conventional factory area, the vehicle's power output is stable, and there will be no rolling. The upper and lower ramps with loads can also maintain a stable operation state, and they are suitable for the operation scenarios of the slope loading and unloading platform. Most common loading and unloading points in the factory area can be connected to ramps for normal traffic.

Long battery life performance

Continuous regular loading, unloading and transshipment operations at full power can meet the needs of most users for a single shift of about 8 hours. The operation process of halfway replenishment is simple, which can effectively reduce the waiting time for non-operation. There is no need to reserve a long charging and standing maintenance cycle like traditional lead-acid models.