BYD Walking Electric Forklift P15JW-Ei Product Introduction

BYD P15JW-Ei is a lightweight, highly flexible and high-safety walking electric pallet forklift. It is built on BYD's mature new energy lithium battery technology. The whole machine has a compact structure, convenient control and stable operation. It is specially designed for narrow-channel warehousing, short-distance material transfer in workshops, supermarket warehousing, light industrial assembly lines, clean workshops and other scenarios. It is suitable for high-frequency and lightweight handling operations, taking into account energy conservation, durability and operation efficiency. It is suitable for small and medium-sized warehousing material handling operations.

First, product basic information

This model is a pure electric walking forklift produced by BYD's original factory, without the need for a driver's cabin. It uses manual walking operation to effectively improve the pollution and high energy consumption of traditional fuel equipment. The equipment operates with low noise and no fuel emissions. It is suitable for various indoor closed and clean operating environments and meets the needs of modern green warehousing operations.

Basic Attribute
The manufacturer is BYD (BYD), the power type is pure electric, the driving mode is walking, and the rated load is 1500kg, which can meet the daily needs of small and medium-sized cargo handling operations.

Second, accurate technical parameters of the whole machine

All the parameters in this section are the official standard configuration data of the equipment, which is in line with the actual operating conditions of the equipment.

1. Load and dimensional parameters

The rated load capacity is 1500kg, the load center distance is 600mm; the front suspension distance is 930mm, and the wheelbase is 1200mm; the standard fork weight of the equipment is 131kg, and the whole machine adopts a lightweight design, which makes the equipment easy to move and flexible to operate. Under full load, the load driving side of the bridge is 515kg, the load-bearing side is 1100kg, and the load-bearing side is 95kg and the load-bearing side is 20kg under no load. The force structure of the equipment is balanced and stable.

The total length of the whole machine is 1580mm, excluding the forklift body length of 430mm and the total width of 560mm/685mm; the fork specification is 50mm/160mm/1150mm (thickness/width/length), and the outer width of the fork is 560mm/685mm; the minimum reduction height of the fork is 85mm, the maximum lifting height is 120mm, and the minimum ground clearance is 30mm, which is suitable for conventional pallets and ground working environments. The height of the working handle can be adjusted in the range of 650mm-1310mm, which is suitable for operators of different heights to improve the operation comfort.

2. Traffic and operating space parameters

The minimum turning radius of the equipment is 1360mm, the steering is flexible, and it is suitable for narrow channel operations. Under standard working conditions, 10001200mm pallets are placed across the fork, and the width of the right-angle stacking channel is 2140mm; 8001200mm pallets are placed along the fork, and the width of the right-angle stacking channel is 2015mm, which helps to improve the utilization rate of warehouse space and adapt to intensive shelf storage operations.

3. Walking and dynamic performance parameters

Driving speed distinguishes working conditions, no-load up to 5km/h, full-load 4.5km/h, smooth and controllable speed, taking into account operational efficiency and safety. Lifting and descending operation is stable, full-load lifting speed 20mm/s, no-load lifting speed 25mm/s; full-load descending speed 60mm/s, no-load descending speed 25mm/s, uniform lifting rhythm, can effectively avoid cargo shaking and dumping.

Equipment climbing performance is good, no load climbing up to 20%, full load climbing 8%, can be adapted to the warehouse gentle slope, loading and unloading platform and other slight height difference road surface, working conditions adaptability is strong. Equipment equipped with electromagnetic driving brake, brake response is fast, stable operation, effectively avoid skid, skid and other hidden dangers.

4. Motor and battery configuration

The power system uses dual motors, the drive motor is a 0.8kW DC brushless motor, with stable output for 60 minutes of continuous operation. The brushless structure is maintenance-free, the lifespan is longer, and the power loss is low. The lifting motor is a 0.75kW DC brushed motor, which is suitable for the lifting power requirements of goods, and the operation is stable and reliable.

Equipped with BYD's dedicated 48V/24Ah lithium battery, the battery weighs 10kg, and the lightweight battery design is easy to disassemble, charge, and maintain. Relying on BYD's mature lithium battery technology, the battery cycle is stable, supports charging and use, and has no memory effect, which can effectively reduce the cost of later use of the equipment.

5. Walking and noise reduction parameters

The whole car is equipped with wear-resistant polyurethane tires, driving wheel size 16055mm, load-bearing wheel size 8068mm, balance wheel size 8030mm, wear-resistant, anti-manufacturing, silent and anti-skid, suitable for cement, epoxy floor and other ground, the operation is not easy to scratch the ground. Wheel configuration 1 + 2/4 structure, wheel pitch drive side 500mm, load-bearing side 400mm/525mm, the grounding state is stable, and there is no deviation problem when driving. Equipment operation driver's ear noise is 70db (A), low running noise, which can optimize the workshop working environment.

III. Core product advantages

1. Lightweight body, suitable for narrow channel operation

The whole machine has a streamlined structure, light weight, small turning radius, and small stacking channel space required for operation. It can be flexibly shuttled to the back of supermarkets, small warehouses, and narrow passages of workshop assembly lines, thus improving the problem of large size and difficult passage of traditional forklifts, helping to improve the utilization rate of storage space, and adapting to intensive storage operation scenarios.

2. Lithium batteries are energy-saving and durable, with lower usage costs

Equipped with BYD's original lithium battery system, compared with traditional lead-acid batteries, it does not require frequent water replenishment and maintenance, has stable battery life, longer service life, and operates without exhaust gas pollution and odor. It is suitable for clean operation scenarios such as food, medicine, and precision electronics. The energy consumption utilization rate of the equipment motor is good, and the power consumption is low. Long-term use can save electricity bills and maintenance expenses, and has good economy.

3. Multiple safety protections for more secure operation

Standard electromagnetic braking system, sensitive braking, stable parking, effectively avoid problems such as ramp skidding and emergency working conditions; the fuselage force structure has been optimized, the bridge load distribution is balanced, and it is matched with wear-resistant and anti-skid polyurethane wheels, which is not easy to slip and roll. The height of the handle of the equipment is adjustable, and the holding operation is comfortable. With a stable lifting and driving speed control system, it can reduce the damage and safety hazards of goods caused by misoperation, and fully ensure the safety of personnel and goods.

4. Stable performance, wide range of working conditions

The brushless drive motor supports maintenance-free use, low probability of failure, stable power output of the lifting motor, controllable lifting speed zoning, and smooth switching between no-load and full-load operation states. The equipment has good climbing ability and ground clearance, and can be adapted to various ground conditions such as warehouse ramps, uneven floors, loading and unloading areas, etc., and the multi-scene operation state is stable.

5. Easy to operate and quick to use

Walking manual control mode, support stepless speed regulation, simple and easy to understand operation logic, no professional operation qualifications are required, and beginners can get started quickly. The whole machine has low running noise and small vibration, and it is not easy to cause fatigue after long-term operation. It is suitable for high-frequency and long-term assembly line transshipment, warehouse sorting, and cargo replenishment operations.

IV. Core application scenarios

1. E-commerce warehousing and express sorting center: small goods turnover, pallet transfer, loading and unloading auxiliary operations;

2. Supermarket retail industry: store replenishment, back warehouse cargo sorting, shelf material transfer;

3. Food, medicine, and clean workshops: lightweight cargo handling without dust, odor, and low pollution requirements.

4. Light industry manufacturing workshop: production line material supply, work in progress transfer, workshop short-distance material flow;

5. Transshipment in small warehouses, corridors, and elevators: cargo handling operations in confined spaces.

V. Product Summary

BYD P15JW-Ei walking electric forklift is a storage and handling equipment suitable for lightweight operations. It is built on BYD's mature new energy technology and has the characteristics of small and flexible, energy saving and low consumption, stable operation, convenient maintenance, and wide scene adaptation. The equipment is suitable for 1.5-ton lightweight high-frequency handling scenarios, which can improve the efficiency of warehousing operations, reduce manpower and operation and maintenance costs. It is suitable for various material handling scenarios such as warehousing in small and medium-sized enterprises, light industrial workshops, and supermarket warehousing.