3.5 ton BYD electric forklift operation specifications, safety operation points

Basic inspection before departure

Key points of inspection before operation

Before starting the vehicle, it is necessary to complete the appearance inspection of the whole body to confirm that there is no obvious collision and deformation, the tire is in good condition, the tire pressure is in the normal range, the braking and steering systems are responsive and there is no card, the remaining power can meet the basic operation needs of the day, the indicator lights of the instrument panel have no abnormal alarms, and all operating handles are in the reset state. At the same time, check the operation area around the vehicle in advance to confirm that there are no idle personnel staying and no obstacles blocking, and then start the vehicle smoothly after the whistle is signaled to avoid the risk of scratches and collisions in the moment of starting.

Process compliance control

Daily homework precautions

The driving process strictly abides by the speed limit requirements of the factory area. When passing through turns, warehouse entrances and exits, and crowded areas, the brake horn should be sounded to anticipate the movement of surrounding personnel and vehicles in advance to avoid unexpected situations. The lifting height of the fork should not be too high in the driving state. Keep the fork in a safe range from the ground. Start smoothly when handling goods. It is strictly forbidden to accelerate the sudden brake to cause the goods to slide. The whole operation shall not be overloaded. The fork fully extends into the bottom of the goods and then does the lifting action. It is not allowed to use the fork to push other goods. It is strictly forbidden for personnel to stand on the fork and carry them on the vehicle. Special high-altitude operations need to be matched with a compliance operation platform.

Precautions for operation and maintenance after receiving the car

Follow-up maintenance requirements

After the operation on the same day, park the vehicle in the designated dedicated parking area. After the fork is completely on the ground, tighten the handbrake and cut off the power supply of the vehicle. Clean up the sundries and dust attached to the body in a timely manner, and check whether there are any parts bumping and damage during the operation on the same day. If any hidden trouble is found, report it to the operation and maintenance personnel as soon as possible, and do not force the operation with the fault. All operators need to hold the corresponding qualifications to work. It is strictly forbidden for unauthorized personnel to operate the vehicle at will, and regularly do a good job of vehicle maintenance registration to avoid various operation risks from the root cause.