High gantry electric forklift purchase guide: analysis of parameters and applicable scenarios of various BYD models

Key points for selecting core parameters of high gantry electric forklift

Lifting height and load parameters

When purchasing a high-gantry electric forklift, you must first clarify the highest floor height of the shelf in your own warehouse area, and reserve a certain safety redundancy height on this basis, and then match the rated lifting height of the corresponding model. At the same time, focus on the remaining load value under the rated lifting height to avoid the problem of insufficient load when the vehicle is lifted to the highest position and cannot handle goods normally. If there is a need to handle special-shaped goods, it is also necessary to confirm the suitable load loss in advance.

gantry structure parameters

The working space of the door frame with different sections varies greatly, and the closing height of the two door frames is higher, which is suitable for flat warehouse operations with sufficient headroom; the closing height of the three door frames is lower, which can pass through the entrance and exit of the low warehouse area and the loading and unloading platform, and at the same time meet the lifting needs of the high-rise shelves. When purchasing, it is also necessary to combine the width of the working channel to match the models corresponding to the body length and turning radius to avoid the problem of unable to turn in the channel.

Analysis of applicable scenarios for different models

General-purpose model for small and medium-sized warehousing

Models with a rated lifting height of 4 to 6 meters, with a rated load of generally 1 to 2 tons, are suitable for shelf access operations in ordinary e-commerce warehouses and small and medium-sized daily necessities warehouses. This type of model has a small turning radius, can operate flexibly in a channel with a width of about 3 meters, and can meet the needs of the 8-hour shift production industry. The procurement and maintenance costs are relatively low, making it suitable for small and medium-sized warehousing scenarios.

Heavy-duty high-library special model

Models with a rated lifting height of 8 to 12 meters, with a rated load of 2 to 3 tons, are suitable for high-rise shelf operations in large commodity warehouses and industrial raw material warehouses. The body weight of this type of model is more sufficient, and the stability is stronger in the lifting state. Some models can also be adapted to side shifters, spacing forks and other attachments to meet the loading and unloading needs of different specifications of goods, and the operation efficiency is higher.

Narrow channel special model

Suitable for high-frame models with narrow passages within 2.5 meters, they are generally equipped with a special steering structure, which does not require too much turning space. They are suitable for high-density storage three-dimensional warehouses, which can greatly improve the utilization rate of storage space in the warehouse area. They are suitable for scenarios with high storage volume requirements.

When purchasing, it is also necessary to consider factors such as its own operating frequency, charging conditions, and maintenance convenience to ensure that the selected model can fully adapt to daily operating needs.