Detailed explanation of BYD CPD20 forklift technical parameters, rated load and lifting specifications

Description of core basic parameters

As an electric counterbalanced forklift developed for short- and medium-distance storage and handling scenarios, the overall design of this model is optimized around the two core directions of lightweight and operation stability. The weight distribution of the whole body has been checked by many working conditions, which can adapt to the conventional handling needs of most ordinary flat warehouses. The weight distribution of the whole machine is uniform, there is no risk of rolling during daily driving, and the operating threshold is low. Ordinary licensed operators can get started with simple familiarity, and the fatigue of long-term operation is relatively low.

Rated load related instructions

The standard rated load of this model is set to 2 tons. This parameter is determined when the fork is in the standard load center distance state. In the actual operation process, if the load center distance exceeds the calibration range, the corresponding safe bearing weight will be reduced accordingly. The operator needs to check the corresponding load curve in advance to confirm the safe load threshold to avoid the operation risk caused by illegal overloading. The rated load parameter is the core reference index for equipment selection. Before purchasing, it needs to be matched with the average weight of the goods handled daily to avoid the waste of resources caused by excessive load redundancy, or the situation that the load is insufficient to meet the needs of the operation.

Lifting Specifications Related Instructions

The standard lifting height of this model has multiple optional configurations. The maximum lifting height of the basic model is 3 meters, which can fully meet the storage and storage needs of conventional 2 to 3-layer shelves. If users have higher shelf access requirements, they can also choose a customized door frame configuration. The maximum lifting height can be adapted to most high shelf scenarios within 5 meters. The minimum falling height of the fork meets the traffic requirements of conventional pallets, and it can be used normally without additional modifications and upgrades to the warehouse floor. The lifting speed during the operation of the door frame has been reasonably adjusted, so that the goods will not shake and slide due to excessive speed, nor will the overall operation efficiency be slowed down due to excessive speed.

Precautions for daily use

In the actual operation process, the operator needs to operate in strict accordance with the calibrated technical parameters, and do not deliberately try to exceed the bearing capacity of the equipment. Regularly check the wear of the transmission parts and load-bearing forks of the lifting gantry, and replace the parts that exceed the wear standard in time, which can effectively prolong the service life of the equipment and ensure the stability of long-term operation.