BYD LECB18S forklift attachments modification plan and precautions sharing

Electric forklift attachments modification core scheme

Adaptability accessory selection

For the LECB18S model electric forklift, the modified attachments need to match the forklift's rated load, hydraulic output parameters, and operating scene requirements. Commonly used attachments include side-shifting forks, rotary grippers, etc. When selecting models, it is necessary to confirm the interface specifications of the attachments and the forklift. To avoid size discrepancies or power incompatibility problems.

Modification process specification

Before the modification, it is necessary to comprehensively check the original hydraulic system and circuit running status of the forklift to confirm that each component is free of wear or malfunction; during installation, the standardized positioning method is used to fix the attachments to ensure that the connection parts are firm; after the installation is completed, an no-load operation test is required to check whether the lifting, rotating, and lateral movement of the attachments are smooth, and then a load test within the rated load range is carried out to verify the stability.

Precautions for modification

Safety compliance check

The modification process should follow the general safety standards of the industry, it is strictly forbidden to exceed the rated load of the forklift for the modification of the attachments. After completion, the attachments, hydraulic pipelines and electrical interfaces should be inspected in an all-round way to confirm that there is no loosening or leakage. Do a good job of on-site safety protection during practice running to avoid irrelevant personnel from entering the operation area.

Daily maintenance points

After modification, it is necessary to establish a regular maintenance mechanism, check the tightness of the connecting bolts of the attachments every half month, clean the hydraulic oil filter element every month and check the wear of the pipeline, lubricate and maintain the moving parts of the attachments every quarter, and record the use status of the attachments. Check for potential faults in a timely manner to ensure safe operation.