BYD CPD16S forklift daily maintenance guide and maintenance cycle description

Key steps in daily maintenance

Before each operation starts, it is necessary to complete the appearance inspection around the forklift to check whether the body is deformed, whether the door frame structure is firm, whether the tire pressure meets the requirements, and whether there are cracks or excessive wear. At the same time, test the sensitivity of the braking and steering functions, check whether the lights and horns are normal, confirm whether there is leakage in the hydraulic system, and whether the lifting, forward and backward movements of the door frame are smooth and free of abnormal noises to ensure that there are no safety hazards before operation. The daily maintenance of electric components is the focus. It is necessary to pay attention to the battery status. Charge according to the specifications after operation to avoid long-term power loss. Regularly clean the surface of the battery, check whether the terminal is loose or oxidized, and keep in good contact. At the same time, clean up the debris and dust around the electronic control components to

Clarify the implementation details of the maintenance cycle

Monthly maintenance needs to complete a comprehensive tightening operation, check whether the bolts and nuts of all parts are loose, supplement the hydraulic oil to the standard scale, replace or clean the air filter element to ensure smooth intake, and also need to deeply clean the brake system and debug the braking sensitivity. Quarterly maintenance needs to check the battery capacity and check the corrosion of the internal plates; annual maintenance needs to replace the hydraulic oil and filter element, disassemble and check the wear degree of the drive motor and steering mechanism, and carry out lubrication and rust prevention treatment. All maintenance needs to follow the corresponding specifications to avoid illegal operation of damaged parts. Regular maintenance can reduce the probability of failure, prolong the service life of the equipment, and ensure stable operation.